Key and Rekey

One of the first projects I took on was to buy new door handles (Amazon link). Neither door lock worked when I got the car. The key would fit in the driver’s door, but wasn’t keyed the same. The passenger side was frozen solid and wouldn’t even allow the key to be inserted.

When I tried to mount the new handles, they were shaped a little different than the originals – more square edges – and just not as comfortable in hand. So, I swapped the new lock cylinders into the old handles. I didn’t realize at the time, the new keys don’t match the old keys. They are a standard double sided key, likely the same kind that you get with universal ignition switches at the parts store.

A few months ago, I sat down with the old cylinders and disassembled them, soaking them down in PB Blaster. I had read online that it is really easy to re-key them. There are nine tumblers and springs in each cylinder. Four on the front and five on the back.

I re-keyed them, arranging the tumblers to fit the old school VW door key that came with the car. Two tumblers in each cylinder were too long and were easily ground down to work.

Finally, today, I got back to it and swapped the re-keyed cylinder back into the driver’s door.

It’s a little notchy, but it works!

I wasn’t able to replace the one on the passenger side. I forgot that there weren’t any springs in the original cylinder on that side. Just the tumblers. Taking apart one of the cylinders from Amazon, it was a similar design, but the springs were twice as long and wouldn’t work. Another thing to add to the list.

At least I was able to delete another black plastic key head from my key chain. It’s nice having two VW keys. I would like to have them all keyed the same, but the ignition key is a different cut, obviously having been replaced at some point. The car has a locking glove box and none of the above keys will even fit into it.

Junk.

Leave a Reply

Your email address will not be published. Required fields are marked *